Filter
Top Products
AMF Commands
AMF Software Reference Supplement for Allied Telesis x-Series Switches
98 AlliedWare Plus
TM
Operating System - Software Version 5.4.3-1.4 and later C613-50031-01 REV B
Related Commands no debug all
clear atmf links statistics
clear atmf links statistics
show atmf
Up/Downlink Ports
Information
Shows all the configured up and down link ports on this node:
■ Port - Name of the local port.
■ Ifindex - Interface index of the local port.
■ VR ID - Virtual router id for the local port.
■ Port Status - Shows status of the local port on the Node as UP/DOWN.
■ Port State - AMF state of the local port.
■ Adjacent Node - Node name of the adjacent node.
■ Adjacent Internal ID - Unique node identifier of the remote node.
■ Adjacent Ifindex - Interface index for the port of adjacent AMF node.
■ Adjacent Board ID - Product identifier for the adjacent node.
■ Adjacent VR ID - Virtual router id for the port on adjacent AMF node.
■ Adjacent MAC - MAC address for the port on adjacent AMF node.
■ Adjacent Domain Controller - Node name of the Domain controller for Adjacent AMF
node.
■ Adjacent Domain Controller MAC - MAC address of the Domain controller for
Adjacent AMF node.
■ Port Forwarding State - Local port forwarding state Forwarding or Blocking.
■ Port BPDU Receive Count - Count of AMF protocol PDU's received.
■ Port Sequence Number - hello sequence number, incremented every time the data
in the hello packet changes.
■ Port Adjacent Sequence Number - remote ends sequence number used to check if
we need to process this packet or just note it arrived.
■ Port Last Message Response - response from the remote neighbor to our last hello
packet.
Figure 1-14: Parameter definitions from the show atmf links detail command (cont’d)
Parameter Definition
Note
You can manage your show output, or make it a more selective, by using a command
modifier. For information on using show-command modifiers, see “Controlling “show”
Command Output” on page 51.