Filter
Top Products
96Switched Rack PDU User Guide
Remote Monitoring Service
Path: Administration > Notification > Remote Monitoring
The APC Remote Monitoring Service (RMS) is an optional service that monitors your system from a
remote operation center 24 hours a day, 7 days a week, and notifies you of device and system events.
To purchase the APC RMS service, contact your vendor or click on the link on the top part of this screen
page: APC RMS Web site.
Registration. To activate RMS for the Rack PDU, select Enable APC Remote Monitoring Service.,
choose between Register Company and Device and Register Device Only, complete the form, and
click Send APC RMS Registration.
Use the Reset APC Remote Monitoring Service Registration check box to discontinue the service,
whether permanently or temporarily (for example, if you are moving a Rack PDU).
Syslog
Path: Logs > Syslog > options
The Rack PDU can send messages to up to four Syslog servers when an event occurs. The Syslog servers
record events that occur at network devices in a log that provides a centralized record of events.
This User guide does not describe Syslog or its configuration values in detail. See RFC3164 for more
information about Syslog.
Identifying Syslog servers.
Path: Logs > Syslog > servers
Setting Definition
Syslog Server Uses IPv4/IPv6 addresses or host names to identify from one to four servers to receive Syslog
messages sent by the Rack PDU.
Port The user datagram protocol (UDP) port that the Rack PDU will use to send Syslog messages.
The default is 514, the UDP port assigned to Syslog.
Protocol Choose between UDP and TCP.
Language Choose the language for any Syslog messages.