Filter
Top Products
100Switched Rack PDU User Guide
Event Log and Temperature Units
Path: Administration > General > Preferences
Color-code event log text
This option is disabled by default. Mark the Event Log Color Coding checkbox to enable color-coding
of alarm text recorded in the event log. System-event entries and configuration-change entries do not
change color.
Change the default temperature scale
Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature measurements in
this user interface.
Reset the Rack PDU
Path: Administration > General > Reset/Reboot
Text Color Alarm Severity
Red Critical: A critical alarm exists, which requires immediate action.
Orange
Warning: An alarm condition requires attention and could jeopardize your data or
equipment if its cause is not addressed.
Green
Alarm Cleared: The conditions that caused the alarm have improved.
Black Normal: No alarms are present. The Rack PDU and all connected devices are operating
normally.
Action Definition
Reboot
Management
Interface
Restarts the interface of the Rack PDU.
Reset All
1
Clear the Exclude TCP/IP checkbox to reset all configuration values; mark the Exclude
TCP/IP
checkbox to reset all values except TCP/IP.
Reset Only
1
TCP/IP settings: Set TCP/IP Configuration to DHCP & BOOTP, its default setting,
requiring that the Rack PDU receive its TCP/IP settings from a DHCP or BOOTP server. See
“TCP/IP and Communication Settings” on page 81.
Event configuration: Reset all changes to event configuration, by event and by group, to
their default settings.
RPDU to Defaults: Resets only Rack PDU settings, not network settings, to their defaults.
1. Resetting may take up to a minute.