Filter
Top Products
42
Chapter 2 Bringing Media into Your System
Choose a scratch disk to hold the media you’re transferring to the project:
Choose Final Cut Pro > System Settings.1
In the System Settings window, click Set in the Scratch Disks tab. 2
Select the hard disk location where you want the media les stored. Select a disk or folder 3
and click Choose. Although there are many other custom settings that you can specify in
the System Settings window, just click OK to set the scratch disk location for now.
When selecting a scratch disk location, avoid selecting a hard disk location Important:
nested within a scratch disk folder that’s already in use, which can cause confusion
about where your media les are located later.
Connect your camcorder or deck to the computer and copy your footage:
Follow the directions that came with your camcorder, video deck, ash memory card, 1
P2 card, or other device to connect the device to the computer or card reader. (Some
le-based camcorders may record les directly to hard disks, in which case you just
connect the hard disk to your computer as you would any other hard disk.)
Follow the instructions that came with your device to copy your footage to your computer. 2
Typically, you must copy an entire folder of les from your device to your computer, and
not copy individual les from within a folder. Once the folder containing your footage is on
your computer hard disk, Final Cut Pro can access it as a mounted volume.