Filter
Top Products
ThinkTank Manual
Copy Requires a Selection
Where It May Occur: COPY (Paragraph Editor)
Possible Causes: You pressed CTRL—C to copy part of a
paragraph, but no selection is defined. First you must iden-
tify the text you want to copy by selecting it.
Suggested Solutions: Press CTRL—S to START a selection,
move the flashing cursor to define it, and press CTRL—S again
to finish it. Then move the flashing cursor to the point at
which you want to make the copy. Now press CTRL—C.
Disk Full!
Where It May Occur: Varies
Possible Causes: Your outline has filled all the allot-
ted space on your disk.
Suggested Solutions: You have three choices:
1. Delete portions of your outline that are no longer
needed.
2. Split the outline into two or more parts by using
the PORT command to move some of it to another disk,
or by copying the file to another disk and deleting
duplicate portions.
3. If you have a hard disk drive, use the PORT command
to move the outline to a disk with more space.
(This technique will not work on a floppy disk
system unless your drives have different
capacities.)
We recommend using the PERCENT command to monitor your use of
disk space.
—204—