Filter
Top Products
ThinkTank Manual
Menu is Empty!
Where It May Occur: SPECIAL; UTILITIES/MENU/LOOK
Possible Causes: You’ve tried to examine the options on
the SPECIALIST command menu, but there aren’t any.
Suggested Solutions: If you know that the menu should
not be empty, try to read it in again by repeating the SPECIAL
or LOOK command (see “Error Reading Menu! “ and “Error Reading
Menu from Disk!”). Make sure the THINKTANK PROGRAM DISK is
properly inserted in its drive. If the menu really is empty
and you want to add commands to it, use the ADD option on the
MENU BUILDER Command Menu.
No Deleted Outline to Restore!
Where It May Occur: DELETE/RESTORE
Possible Causes: The RESTORE option is intended to resur-
rect the last material you deleted with the DELETE/OUTLINE com-
mand. Either you have not used this command with this
outline, or you have already restored the last material you
deleted; you can only do so once. Note that there is no
RESTORE/PARAGRAPH option.
Suggested Solutions: If you have already restored the
material, you nay wish to copy it to another place in your
outline.
No Outline in Drive n!
Where It May Occur: FILES/EXISTS
Possible Causes: You’ve asked ThinkTank to load an
outline from a certain disk drive, but it can’t find one in
that drive.
Suggested Solutions: Make sure the disk containing your
outline is properly inserted in the drive.
—208—