Filter
Top Products
Notes and Suggestions
RECALL can help you enter the correct file name. When Think—
Tank asks, NAME OF PASCAL TEXTILE?, press CTRL.—E to RECALL
the last entry.
Text File Ports with Two Floppy Drives
Here are concise instructions for porting between an
outline and a text file for a computer system with two floppy
disk drives. See PORT in the reference guide for other con-
figurations.
(a)Porting from an outline to a text file. You will
need a disk formatted for the PASCAL operating system to store
the file (see Appendix C).
1. Move the bar cursor to the top of the outline you
wish to port.
2. From Top Level, press “PTSS” to select
PORT/TEXTILE/SEND/STRUCTURED.
3. When ThinkTank asks:
NAME OF PASCAL TEXTILE?
type #4: followed by a file name of up to 10 charac—
ters.
4. When ThinkTank asks:
REMOVING THE THINKTANK DISK?
first replace the THINKTANK PROGRAM DISK in Drive 1
with your formatted disk; then press Y.
5. ThinkTank will port your outline to the text file.
When it’s finished, it will tell you to:
REPLACE THINKTANK PROGRAM DISK, THEN
PRESS (SPACEBAR)
Remove the disk that now contains the text file from
Drive 1 and replace it with the THINKTANK PROGRAM
—79—