Filter
Top Products
AF Format is Sonic Blasters own filetype. This is the default
format for saving files. You’ll save the file you want to use as
your startup sound in this format.
AIFF Format is the Apple Standard format.
2:1 Compressed is a format which does some squeezing to save
the same amount of information in half the space.
2.67:1 Compressed same as above but compacting even more.
This difference between 2:1 and 2.67:1 will be most noticeable on
very large files.
The most noticeable difference between a compressed files and a
non-compressed file is the amount of space it takes to store the
file. Another difference is that the fidelity may be slightly
decreased by the compression. The quality loss is very slight,
especially in the case of voice recordings. Try saving a file in
both the compressed formats and compare disk space used and
quality with the original.
Raw Data is a mono file saved in straight binary format. This
means that information, such as the speed at which the file was
recorded, is not saved in this format. If you’re saving a file
recorded in stereo as raw data, the two channels will be
combined into one channel and saved as a mono file. When
raw data files are loaded, the playback rate is set to the default
setting of 22085 Hz.
* Note: If you plan to use a program or desk accessory that
plays back sound files, other than the ones provided
with the Sonic Blaster, you’ll need to find Out the
program’s or desk accessory’s default playback rate (if it
does not let you set the playback rate) and record your
sound files at that speed before saving as Raw Data.
Try saving the same file in the different formats and then play
them back and check the amount of memory used to determine
if you can tell a difference.
The "File" Options 27