Filter
Top Products
Mix
Select the Mix option to begin mixing the clipboard sample with
the selected sample of the active window.
When mixing segments, keep in mind the following rules:
◊ The mix option will be inactive until you have a
segment selected in the active window.
◊ Listen to the clipboard sample before mixing using the
Play Clipboard command
( -*) under the Setup menu.
◊ Samples recorded at different rates will be mixed at the
different rates and may sound peculiar together.
◊ You can undo a mix immediately after use the Mix
command.
◊ If the clipboard sample is shorter than the selected
segment, it will end before the selected sample ends.
◊ You will need enough memory to copy the sample you
want to mix to the clipboard.
◊ Mixing the clipboard contents with a selected segment of
a file will not increase the size of the file.
Select All ( -A)
Select All has the same effect as dragging the selection bar from
the sound graphs beginning to its end. If you notice that the
Select Region shows only half the value shown on the cassette
label after you’ve used Select All while the file is in Full View,
this is because you’re working with a stereo file. The cassette
label shows the total bytes of Channel 1 and Channel 2
combined.
Ch. 3
- The "Edit" Options 33