![](http://pdfasset.owneriq.net/8/50/8508cf0e-8adb-4825-a653-31c32aa915e1/8508cf0e-8adb-4825-a653-31c32aa915e1-bg76.png)
5-20
Chapter 5: Software support
2. Press <2>, then <Enter> to select Stripe (RAID 0).
3. Press <1>, <7>, then <Enter> to select the Block Size.
4. Press <1>, <2>, then <Enter> to select the Transfer Mode.
5. Use the <Up> or <Down> arrow keys to move the selection bar, then
press <Enter> to select a disk drive.
6. Press N then <Enter> to create a stripe (RAID 0) configuration.
Press Y if you wish to split the data on the source disk to other disks.