Filter
Top Products
4-30
Chapter 4: BIOS setup
Boot Up Floppy Seek [Disabled]
When enabled, the BIOS will seek the floppy disk drive to determine whether
the drive has 40 or 80 tracks. Configuration options: [Disabled [Enabled]
Boot Up NumLock Status [On]
Allows you to select the power-on state of the NumLock.
Configuration options: [On] [Off]
Full Screen LOGO [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
APIC Mode [Enabled]
When enabled, this option allows you to distribute interrupt routings other
than the 16 IRQs. The Programmable Interrupt Controller (PIC) setting
allows you to use the 16 IRQs only. Configuration options: [Disabled]
[Enabled]
Make sure that the Full Screen Logo item is set to [Enabled] if you wish
to use the ASUS MyLogo2™ feature. See page 5-13 for details.