Filter
Top Products
ASUS P4R800-V Deluxe motherboard user guide
3-3
POST Message Action
System failed due to CPU • Check your CPU settings in BIOS
overclocking and make sure you
only set to the recommended
settings. See section
“4.4 Advanced menu.”
No keyboard detected • Check your keyboard if properly
connected to the purple PS/2
port on the rear panel.
• See section “2.7.1 Rear panel
connectors” for the location of the
port.
No floppy disk detected • Make sure you have connected a
floppy disk drive to the floppy disk
drive connector on the motherboard.
No IDE hard disk detected • Make sure you have connected an
IDE hard disk drive to the one of the
IDE connectors on the motherboard.
CPU temperature too high • Check if the CPU fan is working
properly.
CPU fan failed • Check the CPU fan and make sure
it turns on after you applied power
to the system.
• Make sure that your CPU fan
supports the fan speed detection
function.
CPU voltage out of range • Check your power supply and
make sure it is not defective.
• Call ASUS technical support for
assistance. Refer to the ASUS contact
information.
System completed • No action required
Power-On Self Test
Computer now booting • No action required
from operating system
You may enable or disable the ASUS POST Reporter™ by adjusting
the Speech IC Reporter BIOS option. See page 4-22 for details.