Filter
Top Products
4-16
Chapter 4: BIOS setup
4.4 Advanced menu
The Advanced menu displays the CPU type, speed, cache RAM, front side
bus frequency and DRAM frequency information. The BIOS auto-detects
the values for these parameters and are not user-configurable.
USB 2.0 Controller [Enabled]
This field allows you to enabled or disable the USB 2.0 controller in the
South bridge chip. Configuration options: [Disabled] [Enabled]
USB Legacy Support [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. The
default of [Auto] allows the system to detect a USB device at startup. If
detected, the USB controller legacy mode is enabled. If not detected, the
USB controller legacy mode is disabled.
When you set this field to [Disabled], the USB controller legacy mode is
disabled whether or not you are using a USB device.
Configuration options: [Disabled] [Enabled]
Init Display First [PCI Slot]
This field allows you to select which graphics controller to use during the
boot-up process. Configuration options: [PCI Slot] [AGP]
CPU Type Intel Pentium(R) 4
CPU Speed 2.40GHz
CPU Cache RAM 512K
Current FSB Frequency 533MHz
Current DRAM Frequency 333MHz
USB 2.0 Controller [Enabled]
USB Legacy Support [Enabled]
Init Display First [PCI Slot]
Frequency/Voltage Control
Chip Configuration
I/O Device Configuration
PCI Configuration
Instant Music
F1 : Help
↑↓
: Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit
→←
: Select Menu Enter : Select Sub-menu F10 : Save and Exit
Select Menu
Item Specific Help