Filter
Top Products
2-22
Chapter 2: Hardware information
2. IDE connectors (40-1 pin PRI_IDE [blue], SEC_IDE [black])
These connectors support the provided UltraDMA IDE hard disk ribbon
cable. Connect the cable’s blue connector to the primary
(recommended) or secondary IDE connector, then connect the gray
connector to the UltraDMA100 slave device (hard disk drive) and the
black connector to the UltraDMA100 master device.
• Pin 20 on each IDE connector is removed to match the covered hole
on the UltraDMA cable connector. This prevents incorrect orientation
when you connect the cables.
• The hole near the blue connector on the UltraDMA cable is intentional.
• For UltraDMA100 IDE devices, use the 80-conductor IDE cable.
P4R800-V
DELUXE
®
P4R800-V DELUXE
IDE Connectors
NOTE: Orient the red marking
s
(usually zigzag) on the IDE
ribbon cable to PIN 1.
SEC_IDE
PRI_IDE
PIN 1
3. GAME/MIDI connector (16-1 pin GAME)
This connector supports the bundled USB/GAME module. Connect the
USB/GAME module cable to this connector. The GAME/MIDI port on
the module connects a joystick or a game pad for playing games, and
MIDI devices for playing or editing audio files.
P4R800-V
DELUXE
®
P4R800-V DELUXE
Game Connector
GAME
+5V
+5V
J2B1
J2CX
MIDI_OUT
J2CY
J2B2
MIDI_IN
J1B1
J1CX
GND
GND
J1CY
J1B2
+5V