Chapter 1. Introduction
5
Rear View
No. Component Description
1 Reset This switch resets the device. Press and release to reset the
UC410.
2 Game Port The Game Port is used to connect the UC410 to a PS or
Xbox game console. This port also provides power to the
unit when connected to a game console.
3 PC Port Use the PC port to connect the UC410 to a computer. This
connection is used to configure the UC410 with the
Phantom-S software, or connecting a laptop for game play.
Note: The PC Port does not power the unit.
4 Power Port This port provides power to the unit. You must use this port
for power when connected to a computer; or if you are using
an advanced keyboard that requires additional power during
gameplay.
Use a mini USB to USB cable to connect this port to a 5V
power source.
1
2
3
4