Filter
Top Products
4. Phantom-S Software
29
Software Overview
This section provides an overview of how to use the Phantom-S software. The
sections that follow provide details on each step. Connect the UC410 to a
computer and do the following:
1. Add a Group.
2. Add Profiles to the group.
3. Upload the group to Current.
4. Go to the Current tab.
5. Use the Profile Selection Radio Button to set a profile (turns red) as the
default start-up profile.
6. Connect the UC410 to the game console / keyboard / mouse.
7. The keyboard/mouse is ready for use with the profile set in step 5.
8. Press a Profile Selection Hotkey [F1]~[F8] to switch profiles from the
keyboard. Profiles in Current are selected for use.
33
2
4
1
5