Filter
Top Products
Chapter 5. Firmware Upgrade
61
Firmware Upgrade Recovery
There are three conditions that call for firmware upgrade recovery:
When the unit’s firmware becomes corrupted and you are unable to
operate it.
When a firmware upgrade procedure is interrupted or the UC410 is
unplugged.
When a firmware upgrade procedure fails.
To perform a firmware upgrade recovery, do the following:
1. Unplug the UC410 from the computer.
2. Use a pen or paper clip to press the Reset button on the UC410.
3. With the Reset button pressed, connect the UC410 to the computer via the
power and PC ports.
4. Hold the Reset button for 5 seconds.
5. Double click the Firmware Upgrade Utility to run it without the Phantom-
S software.
6. Upgrade the firmware as explained in Performing the Upgrade, page 58.
7. Unplug the UC410 from the computer.
8. Plug the UC410 into the computer.