Filter
Top Products
Chapter 2. Setup
7
Computer
To connect the UC410 to a computer to use with the Phantom-S software use
the steps below.
Use the diagram on page 8 to do the following:
7. Use the Mini USB to USB cable included with this package to connect the
PC Port* to a computer.
8. Use a Mini USB to USB cable (not included) to connect the Power Port*
to a computer, or 5V USB power source.
9. Start the Phantom-S software (see Phantom-S Software, page 24).
Note: The PC Port and Power Port must be connected to power the UC410
when connected to a computer to use the Phantom-S software.