Filter
Top Products
WAN Configuration
138 Avaya Integrated Management Release 4.0.1 Software Update Manager
To delete a Frame Relay sub-interface:
1. Click the Frame Relay sub-interface you want to delete.
Note:
Note: You can only delete Frame Relay sub-interfaces on which no IP interfaces are
defined.
2. Click Delete. A confirmation dialog box opens.
3. Click Yes.
4. Click Apply. The Frame Relay sub-interface is deleted.
The following table provides a list of the fields in the Sub-Interfaces tab of the USP dialog box
and their descriptions:
Table 49: USP Dialog Box - Sub-Interfaces Parameters
Field Description
Name The name of the Frame Relay sub-interface.
Description A user defined description of the Frame Relay sub-interface.
Type The provisioning of the Frame Relay sub-interface. Possible values
are:
● Point to point - The Frame Relay sub-interface is configured
for connection with a single remote endpoint.
● Point to multipoint - The Frame Relay sub-interface is
configured for connection with multiple remote endpoints.
Bandwidth (kb/s) The bandwidth of the Frame Relay sub-interface in bits per second.
Admin Status The administrative status of the Frame Relay sub-interface. Possible
values are:
● Enable - The Frame Relay sub-interface is enabled for
transmission and receiving of packets.
● Disable - The Frame Relay sub-interface is disabled for
transmission and receiving of packets.
1 of 2