Barco HDX W12 Projector User Manual


 
4. Input & Communication
4.2 Input source connections
DVI and 3G/HDSDI input
This input module is standard delivered with the HDX projector.
DUAL LINK DVI-I HDCP
INPUT
SEL
SYNC
3G/DUAL HDSDI
OUT1
IN1
IN2
OUT2
SEL
SYNC
SEL
SYNC
R9864000
Image 4-2
Dual Link DVI and 3G/Dual HDSDI input
The yellow LED lights up when valid input sync is detected.
The green LED lights up when the input is selected.
DVI input specications :
RGB analog : up to 170 MHz.
Single DVI : up to 165 MHz
Dual link DVI : up to 210 MHz
DVI will not natively support 10-bit or 12-bit deep color. It is possible to enable 30-bit color over DVI using
a specic pixel packing. We support the pixel-packing that is implemented by Silicon Image Sil7189 DVI re-
ceiver.
3G/Dual HDSDI input specications :
3G follows the SMPTE 425M standard.
HDSDI follows he SMPTE 292M standard.
Dual link follows the SMPTE 372M standard
SDI follows the 259M standard
5-cable input (optional)
Optional multi purpose input which can be inserted in the free slots.
BARCO
R/PR G/Y/VIDEO
B/P
B
H/S
V/C
R
5-CABLE INPUT
SEL
SYNC
R9864010
Image 4-3
Signal connectivity
Input signal
R/P
R
G/Y/VIDEO B/P
B
H/S V/C
R
RGBHV
R
G
BHV
RGBS
R
G
B
S
RGsB
R
Gs
sync on green
B
——
RGBCV
R
G
B
CV
-
Composite Video
VIDEO
———
Super Video
Y
Luma
——
C
Chroma
Component Video
-S
P
R
/(R-Y)
Y
P
B
/(B-Y) S
Component Video
-SOY
P
R
/(R-Y)
Ys
P
B
/(B-Y)
——
YUV-CV R-Y Y B-Y CV
-
5-cable input specications :
48
R5905032 HDX SERIES 02/03/2015