Barco HDX W12 Projector User Manual


 
8. Input
Image 8-38
No signal, auto dimming
2. Press ENTER to toggle between [On] or [Off].
[On] : when no signal, auto dimming is started.
[Off] : when no signal, no auto dimming is started.
8.8 EDID
EDID
Extended Display Identication Data
About EDID
The EDID le available for DVI input connectors includes timings supported by the projector; display size and other information about
the display (i.e. projector). It is the set of information that is used by digital sources connected to the projector to generate a suitable
image signal.
From the OSD, you can for each DVI input connector choose to use the Standard EDID le or create and force your custom made
EDID le. The selection of the EDID le to be used is made in the Congure menu. Making your own custom EDID le(s) is done
through Create.CustomEDIDles can be deleted at any time.
The Standard EDID includes two timings: 1920x1200 @ 60Hz / 1920x1080@60H z (for HDX, HDF and APOLLO
projectors) and 2 048x1080@60Hz / 1920x1 080@ 60Hz (for HDQ projectors).
Overview
•Congure an input
Create custom EDID le
Delete a custom EDID le
Delete all custom EDID le
8.8.1 Congure an input
Description
Selecting the Standard EDID le or an own created le can be selected from the list of Custom EDID les for the input.
How to congure
1. Press Menu to activate the menus and select Input EDID Congure.
2. Press ENTER to open the EDID conguration menu.
88
R5905032 HDX SERIES 02/03/2015