Filter
Top Products
15. Image Alignment
15.2.1 Adjusting the Analog Image Controls
How to adjust the analog controls
1. From the Random Access mode menu, select item IMAGE SETTINGS. (menu 15-3)
The Image Setting menu appears on-screen and in the graphical display. (menu 15-4)
2. Successivelyselectthe Image Setting items, causingon-screenand in thegraphical display therespective barscale, and proceed
to the adjustments:
The adjustments results in:
Image setting item Press cursor key ← or
turn selection wheel to the left
Press cursor key→ or
turn selection wheel to the right
CONTRAST For less contrast For more contrast
BRIGHTNESS
For less brightness For more brightness
COLOR SATURATION
For less color intensity For more color intensity
TINT (only NTSC signals) Skin tones become purplish Skin tones become greenish
SHARPNESS
not implemented not implemented
PHASE (Computer signals) to refine the vertical stripes
3. Press EXIT (RCU) or select item RETURN (ACSAR) to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
IMAGE SETTINGS
PICTURE TUNING
GEOMETRY
PIP
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX
IMAGE SETTINGS
CONTRAST
BRIGHTNESS
COLOR SATURATION
TINT
PHASE
SHARPNESS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX
15.2.2 Image Fine Tuning
15.2.2.1 Entering the Picture Tuning menu
How to enter the Picture Tuning menu
1. From the Random Access mode menu, select item PICTURE TUNING. (menu 15-5)
The Picture tuning menu appears on-screen and in the graphical display. Noted that the menu items indicated with a “* “ are not
implemented. (menu 15-6)
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
IMAGE SETTINGS
PICTURE TUNING
GEOMETRY
PIP
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX
PICTURE TUNING
CTI [ON]*
COLOR TEMPERATURE*
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH*
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX
76 R5976519 ACSAR 12122002