Filter
Top Products
15. Image Alignment
15.7 Vertical and Horizontal Image Shift
How to shift the image
1. From the Random Access mode menu, successively select item GEOMETRY and SHIFT. (menu 15-24)
The Horizontal Shift bar scale appears on-screen and in the graphical display (A numeric value of “0” on the bar scale indicates
no shift correction applied).
2. Proceed to the Vertical and Horizontal shift adjustment:
The adjustment can be done with the Remote Control or with the selection wheel on the ACSAR.
Adjustment
Numeric buttons
(max. value between +255
and -255)
Changing from Vert. to
Hor. shift bar scale, press
respectively once cursor key ↑
or →.
•PressENTER to activate the numeric value on the bar scale. The
first digit is active and can be changed.
• Enter new value (only a + or –), using the digit buttons on the
Remote Control. Next digit becomes active.
• Enter new value for next digit, using the digit buttons on the
Remote Control. Next digit becomes active.
• Repeat the same action for the other digits and terminate value
entry with ENTER.
•PressEXIT to return.
Horizontal Shift
Cursor keys← and →
• Press the cursor keys ← or → to display the horizontal shift bar
scale.
• Press the cursor keys ← or → until the desired horizontal shift
is obtained.
•PressEXIT to return.
With Remote
control
Vertical Shift
Cursor keys↑ and ↓
• Press the cursor keys ↑ or ↓ to display the vertical shift bar scale.
• Press the cursor keys ↑ or ↓ until the desired vertical shift is
obtained.
•PressEXIT to return.
With selection
wheel
• At start up, horizontal shift bar scale is displayed.
• Rotate selection wheel until desired horizontal shift correction on screen is obtained.
• Press selection wheel to display vertical shift bar scale.
• Rotate selection wheel until desired vertical shift correction on screen is obtained.
• Press selection wheel to confirm and return.
• To repeat steps, press selection wheel again. (image 15-7)
3. Press EXIT (RCU) or select item RETURN (ACSAR) to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
IMAGE SETTINGS
PICTURE TUNING
GEOMETRY
PIP
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX
R5976519 ACSAR 12122002 87