Filter
Top Products
SERVICE MODE
R5975059A BARCOVISION 708 200498
SERVICE MODE
SERVICE MODE
R5975059A BARCOVISION 708 200498
SERVICE MODE
9-169-16
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
ENTER sets the convergence set-
tings to their midposition. EXIT can-
cels the procedure to set the conver-
gence settings to their midposition.
Undo R & B convergence mid
When "R & B convergence mid" is
selected, all convergence settings
are set to their midposition. To cancel
this action, select 'Undo R & B conver-
gence mid' by pushing the control
disc up or down and press ENTER.
'Undo R & B convergence mid' is
displayed in the Memory manage-
ment menu in stead off 'R & B conver-
gence mid' when this latter is pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments are
already readjusted. When undo is
presssed all settings are reset to the
previous settings.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
GR CONVERGENCE MID
MEMORY MANAGEMENT
Green convergence mid
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Only available when the projector is
equipped with green convergence
adjustments.
Highlight 'Gr convergence mid' by push-
ing the control disc up or down and
press ENTER to switch off the green
convergence.
<ENTER> to confirm
<EXIT> to cancel.
Convergence settings
in current block
will be overwritten !
!
R & B CONVERGENCE MID
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
ENTER sets the convergence set-
tings to their midposition. EXIT can-
cels the procedure to set the conver-
gence settings to their midposition.
Undo R & B convergence mid
When "R & B convergence mid" is
selected, all convergence settings
are set to their midposition. To cancel
this action, select 'Undo R & B conver-
gence mid' by pushing the control
disc up or down and press ENTER.
'Undo R & B convergence mid' is
displayed in the Memory manage-
ment menu in stead off 'R & B conver-
gence mid' when this latter is pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments are
already readjusted. When undo is
presssed all settings are reset to the
previous settings.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
GR CONVERGENCE MID
MEMORY MANAGEMENT
Green convergence mid
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Only available when the projector is
equipped with green convergence
adjustments.
Highlight 'Gr convergence mid' by push-
ing the control disc up or down and
press ENTER to switch off the green
convergence.
<ENTER> to confirm
<EXIT> to cancel.
Convergence settings
in current block
will be overwritten !
!
R & B CONVERGENCE MID