Filter
Top Products
RANDOM ACCESS ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
8-12
RANDOM ACCESS ADJUSTMENT MODE
8-12
RANDOM ACCESS ADJUSTMENT MODE
Geometry Adjustments
The geometry adjustments have to be done only on the green image. These
adjustments are automatically implemented for the other color images : Left-right
(EW) and Top-Bottom corrections, blanking, Horizontal amplitude, vertical
amplitude, vertical linearity and Horizontal phase.
Highlight GEOMETRY by push-
ing the control disc up or down
and press ENTER to display the
geometry menu.
ENTER will display Geometry menu
EXIT will return to Internal Crosshatch Se-
lection or Setup Pattern Selection Menu
ADJUST returns to operational mode
Within the geometry adjust
menu, the following adjust-
ments are available :
- horizontal phase (not for in-
ternal # pattern).
- raster shift
- left-right corrections
- top-bottom corrections
- horizontal size
- vertical linearity
- vertical size
- blanking
The convergence corrections
are disabled during geometry
corrections. The blanking cor-
rections are only enabled dur-
ing the blanking adjustments.
ENTER will display the selected option
EXIT will return to Random Access Ad-
justment Mode main menu
ADJUST returns to operational mode
Select with ê or é
<ENTER> to accept
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Geometry Adjustments
The geometry adjustments have to be done only on the green image. These
adjustments are automatically implemented for the other color images : Left-right
(EW) and Top-Bottom corrections, blanking, Horizontal amplitude, vertical
amplitude, vertical linearity and Horizontal phase.
Highlight GEOMETRY by push-
ing the control disc up or down
and press ENTER to display the
geometry menu.
ENTER will display Geometry menu
EXIT will return to Internal Crosshatch Se-
lection or Setup Pattern Selection Menu
ADJUST returns to operational mode
Within the geometry adjust
menu, the following adjust-
ments are available :
- horizontal phase (not for in-
ternal # pattern).
- raster shift
- left-right corrections
- top-bottom corrections
- horizontal size
- vertical linearity
- vertical size
- blanking
The convergence corrections
are disabled during geometry
corrections. The blanking cor-
rections are only enabled dur-
ing the blanking adjustments.
ENTER will display the selected option
EXIT will return to Random Access Ad-
justment Mode main menu
ADJUST returns to operational mode
Select with ê or é
<ENTER> to accept
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with ê or é
then <ENTER>
<EXIT> to return.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING