Filter
Top Products
R5975059A BARCOVISION 708 200498
APPENDIX B : ORBITING
APPENDIX B : ORBITING
R5975059A BARCOVISION 708 200498
APPENDIX B : ORBITING
APPENDIX B : ORBITING
B-5
B-5
Adjustment procedure multiple projector installations :
Important : to allow corrections in the deviation alignments of the slave projectors,
never adjust the deviations of the master projector to its maximum.
Default setting of the Master projector see 'Stand alone projector'.
Highlight 'ADJUST DEVIATION'
with the control disc and press
ENTER.
When adjusting the horizontal and
the vertical deviation, the picture
moves in the corresponding direc-
tion, allowing the set up of the
deviation without orbiting opera-
tion.
ENTER will select the Orbiting Adjustment
menu.
EXIT returns to the Path Selection menu.
Push the control disc to the left
(right) or up (down) to toggle be-
tween Hor. and Vert. deviation
adjustment.
HORIZONTAL
ORBIT AMPL
70
VERTICAL
ORBIT AMPL
70
Adjust horizontal deviation by pushing
the control disc to the left or to the ri
g
ht.
Adjust vertical deviation by pushing
the control disc forward or backward.
<EXIT> to return.
SELECT WITH é OR ê
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH é OR ê
HORIZONTAL WITH ç OR è
SLAVE ORBITING
CHANGE TO MASTER
ADJUST DEVIATION
Adjustment procedure multiple projector installations :
Important : to allow corrections in the deviation alignments of the slave projectors,
never adjust the deviations of the master projector to its maximum.
Default setting of the Master projector see 'Stand alone projector'.
Highlight 'ADJUST DEVIATION'
with the control disc and press
ENTER.
When adjusting the horizontal and
the vertical deviation, the picture
moves in the corresponding direc-
tion, allowing the set up of the
deviation without orbiting opera-
tion.
ENTER will select the Orbiting Adjustment
menu.
EXIT returns to the Path Selection menu.
Push the control disc to the left
(right) or up (down) to toggle be-
tween Hor. and Vert. deviation
adjustment.
HORIZONTAL
ORBIT AMPL
70
VERTICAL
ORBIT AMPL
70
Adjust horizontal deviation by pushing
the control disc to the left or to the ri
g
ht.
Adjust vertical deviation by pushing
the control disc forward or backward.
<EXIT> to return.
SELECT WITH é OR ê
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH é OR ê
HORIZONTAL WITH ç OR è
SLAVE ORBITING
CHANGE TO MASTER
ADJUST DEVIATION