Filter
Top Products
R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
RANDOM ACCESS ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
RANDOM ACCESS ADJUSTMENT MODE
RANDOM ACCESS ADJUSTMENT MODE
8-5 8-5
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
path selection menu will be
displayed. Push the control
disc up or down to highlight
the desired setup pattern and
then press ENTER.
Genlocked pattern : internally
generated cross hatch pat-
tern, locked on the external
source.
Internal # pattern : internally
generated cross hatch pat-
tern and locked on internal
generated sync signals. (No
external source necessary)
If no external source is con-
nected to the projector, the
internal cross hatch pattern
menu will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
ENTER continues to Random Access Ad-
justment Mode or Internal # Pattern Selection
EXIT returns to Path Selection
ADJUST returns to operational mode
choose
a setup pattern
from below:
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Select with é or ê
then <ENTER>
<EXIT> to return
source 1
Selecting Setup Pattern
If an external source is con-
nected to the projector, the
path selection menu will be
displayed. Push the control
disc up or down to highlight
the desired setup pattern and
then press ENTER.
Genlocked pattern : internally
generated cross hatch pat-
tern, locked on the external
source.
Internal # pattern : internally
generated cross hatch pat-
tern and locked on internal
generated sync signals. (No
external source necessary)
If no external source is con-
nected to the projector, the
internal cross hatch pattern
menu will be displayed.
The menus in this manual are
created for an external source,
connected to one of the inputs,
and the 'Genlocked pattern' is
selected.
ENTER continues to Random Access Ad-
justment Mode or Internal # Pattern Selection
EXIT returns to Path Selection
ADJUST returns to operational mode
choose
a setup pattern
from below:
SELECTED SOURCE
GENLOCKED PATTERN
INTERNAL # PATTERN
Select with é or ê
then <ENTER>
<EXIT> to return
source 1