Filter
Top Products
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
GUIDED ADJUSTMENT MODE
R5975059A BARCOVISION 708 200498
7-16
GUIDED ADJUSTMENT MODE
7-16
GUIDED ADJUSTMENT MODE
Top Bow Adjustment
The top bow function corrects
for curvature occurring in the
upper part of the image.
Adjust the bow of the horizon-
tal lines in the upper side of the
image by pushing the control
disc up or down until these
lines are straight.
A bar scale and a number indi-
cator below indicate the amount
of adjustment.
Correct by pushing
the control disc
down.
Bottom Keystone Adjustment
The bottom keystone function
corrects for keystone geom-
etry distortion of the horizontal
lines in the lower part of the
image.
Adjust the horizontal lines in the
lower part of the image by push-
ing the control disc up or down
until these lines are straight.
A bar scale and a number indi-
cator (between 0 and 100) will
give a visual indication of the
adjustment.
Correct by pushing
the control disc
down.
Bottom Bow Adjustment
The bottom bow function cor-
rects for curvature occurring
in the lower part of the image.
Push the control disc up or
down to adjust the bottom bow
in the lower part of the setup
pattern. Adjust until the hori-
zontal lines are straight.
A bar scale and a number
indicator (between 0 and 100
%) give a visual indication of
the adjustment.
Correct by pushing
the control disc
down.
Correct by pushing
the control disc up.
Correct by pushing
the control disc up.
Correct by pushing
the control disc up.
Top Bow Adjustment
The top bow function corrects
for curvature occurring in the
upper part of the image.
Adjust the bow of the horizon-
tal lines in the upper side of the
image by pushing the control
disc up or down until these
lines are straight.
A bar scale and a number indi-
cator below indicate the amount
of adjustment.
Correct by pushing
the control disc
down.
Bottom Keystone Adjustment
The bottom keystone function
corrects for keystone geom-
etry distortion of the horizontal
lines in the lower part of the
image.
Adjust the horizontal lines in the
lower part of the image by push-
ing the control disc up or down
until these lines are straight.
A bar scale and a number indi-
cator (between 0 and 100) will
give a visual indication of the
adjustment.
Correct by pushing
the control disc
down.
Bottom Bow Adjustment
The bottom bow function cor-
rects for curvature occurring
in the lower part of the image.
Push the control disc up or
down to adjust the bottom bow
in the lower part of the setup
pattern. Adjust until the hori-
zontal lines are straight.
A bar scale and a number
indicator (between 0 and 100
%) give a visual indication of
the adjustment.
Correct by pushing
the control disc
down.
Correct by pushing
the control disc up.
Correct by pushing
the control disc up.
Correct by pushing
the control disc up.