Filter
Top Products
Chapter 7 Control Software/Devices
Daylight Display Systems 103 BARCO DLite Software
FIBER DIAGNOSTICS BOX
To bring out the Fiber Diagnostics box, push <Fiber Diagnostics>
The Fiber Diagnostics box allows you to see the diagnostics of the fiberlink. (same as shown on the
Transmitters display)
POSSIBLE DIAGNOSTICS
Fiberlink fully operational
Failed to diagnose the Fiberlink due to a communication error
i
2
c errors detected
i
2
c error detected in back Altera
i
2
c error detected in font Altera
i
2
c errors detected in eeprom
Link errors detected and local loop failed. FATAL ERROR
Problem detected in Receiver path of Fiberlink
Possible cause:
1) Bad Fiberlink
2) Failure of Transmitter Laserdiode
Problem detected in Transmitter path of Fiberlink
Possible cause:
1) Bad Fiberlink
2) Failure of Transmitter Laserdiode
3) Failure of Transmitter opto-receiver
Severe problem detected
Undefined error: PLEASE CONTACT YOUR VENDOR
Transmitter Status bits:
Status bit 0: OK/FAILED
Status bit 1: OK/FAILED