Barco R9828832 Projector Accessories User Manual


 
Chapter 3 Getting Started
Daylight Display Systems 18 BARCO DLite Software
OK BUTTON
Click the OK button to save changes or CANCEL to abort.
REMARKS
Other settings as the data bits, stop bits and parity are default and can not be altered
Exit the software by clicking the right mouse on the DLite Software icon and selecting <Exit> from the menu.
4. DISPLAY SETUP
Before using a DLite Display it must be initialized (addressing, positioning,...), either:
Follow the Guided Setup Wizard (started automatically when setting up a display for the first time)
or, follow the Initial Tile Setup
See Control Software SetUp
5. DEFINE SOURCES
Add user defined sources via the Source Control
See Source & Imaging Control to add sources
6. GENERAL USE
By far the most commonly used features for the DLite System will be:
IMAGING
SCALING
See Source & Imaging Control
7. MONITORING
Monitoring is available via the taskbar . Several Monitoring options are possible
MONITORING PROPERTIES
TEMPERATURE CONTROL
HOT SWAP DETECTION
DIAGNOSTICS