Filter
Top Products
Chapter 5 Control Software/System Control
Daylight Display Systems 48 BARCO DLite Software
4.GENERAL
Change the clock- and the PWM value of all tiles of the DLite Display.
1. Click the appropriate 50 or 60 Hz button according to the used source.
2. Enter the desired values or use the default values.
3. Click the SEND CLOCK button.
5.DISPLAY MODE
Put the wall in internal or external mode.
1. Choose the desired mode.
2. Send it to the wall by clicking the SEND MODE button.
6.RESOLUTION MODE
Select the resolution you want to use.
1. Choose the desired resolution.
2. Send it to the wall by clicking the SWITCH RESOLUTION-button.