Barco R9828832 Projector Accessories User Manual


 
Chapter 6 Control Software/Source Control
Daylight Display Systems 86 BARCO DLite Software
WINDOWING OPTION
When a windowing option is present, the scaling window will automatically be adjusted to this option. A
Windowing toolbox will appear allowing the user to define the data/video window.
As well as for data as for video three parameters can be adjusted
1.CUTOUT POSITION
2.CUTOUT SIZE
3.PANNING
These three parameters will be explained with a picture ...
For example, if one tries to display the selected part in this image (orange selection = cutout), one chooses a
part of the total image to be displayed. This part is the cutout. The cutout is defined by its offset from the start
of the image (H Cutout and V Cutout) and its size (H & V cutout size).
If one takes the orange part as the cutout window, one can scroll the information Horizontal AND Vertical.
These are the H & V Panning parameters.
The meaning of these parameters are alike for the data cutout as well as the video cutout ...
The video cutout window is simulated on the software, but the data cutout window has to be setup visually.