Barco R9828832 Projector Accessories User Manual


 
Chapter 6 Control Software/Source Control
Daylight Display Systems 83 BARCO DLite Software
PANNING
Change the panning of the scaled video. One can change this panning by clicking on the scaled video (i.e. the
gray colored rectangle) and drag it until desired panning is reached.
When trying to pan the scaled video outside the active video, the scaled video will be compressed
automatically.
The panning can also be changed by use of the corresponding arrows in the PANNING-menu.
POSITION
Change the Horizontal and Vertical Start Position of the video source on the DLite Display by use of the
corresponding + or - button.
OPTIONS
Select to keep the ratio of the image or not.
UPSCALING
Upscaling is also a possibility (but only relevant if the configuration of the DLite Display exceeds 800*600
resolution). One can diminish the resolution of the tile Horizontal & Vertical so the image is upscaled. It is
automatically limited within the correct resolution range.
Pushing the <Restore Resolution> button forces the tiles back to their normal resolution.
Keep in mind that the changed resolution are dependent of the resolution mode youre in (and also will be
restored when one readdresses the Display)
Selecting the <Keep Ratio> check box determines whether the simulated image keeps its detected ratio.