Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 163
LGB5028A User‘s Manual
Chapter 6: Configuration
Figure 6-83. The Loop Protection Configuration screen.
Parameter Description
General Settings
Enable Loop Protection: Control whether loop protection is enabled (as a whole).
Transmission Time: The interval between each loop protection PDU sent on each port. Valid values are 1 to 10 seconds.
Shutdown Time: The period (in seconds) for which a port will be kept disabled if a loop is detected (and the port shuts down).
Valid values are 0 to 604800 seconds (7 days). A value of zero will keep a port disabled (until next device restart).
Port Configuration
Port: The switch port number of the port
Enable: Control whether loop protection is enabled on this switch port.