Filter
Top Products
724-746-5500 | blackbox.com
Page 24
LGB5028A User‘s Manual
724-746-5500 | blackbox.com
Chapter 5: System Configuration
Figure 5-6. The Users Account Configuration screen.
Parameter Description
User Name: The name identifying the user. This is also a link to Add/Edit User.
Password: Create the password. The allowed string length is 0 to 255, and the allowed content is the ASCII characters from 32
to 126.
Password (again): Confirm the password. You must type the same password again in the field.
Privilege Level: Show the privilege level of the user. The allowed range is 1 to 15. If the privilege level value is 15, the user can
access all groups. Other values refer to each group privilege level. A user's privilege should be same or greater than the group
privilege level so he can access that group. By default, most groups, such as privilege level 5, have read-only access and
privilege level 10 has read-write access. System maintenance (software upload, factory defaults, etc.) requires user privilege level
15. Generally, the privilege level 15 can be used for an administrator account, privilege level 10 for a standard user account and
privilege level 5 for a guest account.
5.3.2 Privilege Level
This page provides an overview of the privilege levels. The switch provides user set Account, Aggregation, Diagnostics, EEE,
EasyPort, GARP, GVRP, IP, IPMC Snooping, LACP, LLDP, LLDP MED, Loop Database, MAC Table, MRP, MVR, MVRP, Maintenance,
Mirroring, POE, Ports, Private VLANs, QoS, SFlow, SMTP, SNMP Security, Spanning Tree, System, Trap, Event, VCL, VLANs, Voice
VLAN, privilege levels from 1 to 15.
Web Interface
To configure Privilege Level in the Web interface:
1. Click “System,” “Account,” and “Privilege Level.”
2. Specify the Privilege parameter.
3. Click “Save.”