Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 197
LGB5028A User‘s Manual
Chapter 7: Security
Upper right icon (Refresh, Clear): Click on the “Refresh” button to refresh the RADIUS Statistics information manually. Click on
the “Clear” button to clear all entries.
7.7 Port Security
7.7.1 Limit Control
This section shows you how to configure the port security settings of the switch. Use the port security feature to restrict input to
an interface by limiting and identifying MAC addresses.
Web Interface
To configure a system configuration of limit control in the Web interface:
1. Select ““Enabled” in the system configuration mode.
2. Check the box next to “Aging Enabled.”
3. Set the aging period (default is 3600 seconds).
To configure a port configuration of limit control in the Web interface:
1. Select “Enabled” in the port configuration mode.
2. Specify the maximum number of MAC addresses in the limit of port configuration.
3. Set action (trap, shutdown, trap and shutdown)
4. Click “Save.”