Filter
Top Products
724-746-5500 | blackbox.com
Page 196
LGB5028A User‘s Manual
724-746-5500 | blackbox.com
Chapter 7: Security
RADIUS Accounting Servers
#: The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address: The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this server.
Status: The current state of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS module is ready to accept accounting
attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did not reply within the configured timeout. The
server has temporarily been disabled, but will be reenabled when the dead-time expires. The number of seconds left before this
occurs is displayed in parentheses. This state is only reachable when more than one server is enabled.
Auto-refresh: Click on the box next to auto-refresh and the device will refresh the information automatically.
Upper right icon (Refresh): Click on the “Refresh” button to refresh the RADIUS Status manually.
7.6.3 Radius Details
This section shows you detailed statistics of the RADIUS authentication and accounting servers. The statistics map closely to those
specified in RFC4668—RADIUS Authentication Client MIB.
Web Interface
To configure a RADIUS details configuration in the Web interface:
1. Specify the port that you want to check.
2. Check the box next to “Auto-refresh.”
Figure 7-20. The RADIUS Authentication Statistics and Accounting Server screen.
Parameter Description
Auto-refresh: Click on the box next to “Auto-Refresh” and the device will refresh the information automatically.