Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 57
LGB5028A User‘s Manual
Chapter 6: Configuration
Figure 6-11. The Aggregation Mode Configuration screen.
Parameter Description
Hash Code Contributors
Source MAC Address: The Source MAC address can be used to calculate the destination port for the frame. Check to enable the
use of the Source MAC address, or uncheck to disable. By default, Source MAC Address is enabled.
Destination MAC Address: The Destination MAC Address can be used to calculate the destination port for the frame. Check to
enable the use of the Destination MAC Address, or uncheck to disable. By default, Destination MAC Address is disabled.
IP Address: The IP address can be used to calculate the destination port for the frame. Check to enable the use of the IP Address,
or uncheck to disable. By default, IP Address is enabled.
TCP/UDP Port Number: The TCP/UDP port number can be used to calculate the destination port for the frame. Check to enable
the use of the TCP/UDP Port Number, or uncheck to disable. By default, TCP/UDP Port Number is enabled.
Aggregation Group Configuration
Locality: Indicates the aggregation group type. This field is only valid for switches.
Global: The group members may reside on different units. The device supports two 8-port global aggregations.
Local: The group members reside on the same unit. Each local aggregation may consist of up to 16 members.
Group ID: Indicates the group ID for the settings contained in the same row. Group ID “Normal” indicates there is no aggrega-
tion. Only one group ID is valid per port.