Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 53
LGB5028A User‘s Manual
Chapter 6: Configuration
Frame Type: Indicate the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
Ethernet Type: The ACE will match Ethernet Type frames.
NOTE: An Ethernet-type-based ACE will not get matched by IP and ARP frames.
ARP: The ACE will match ARP/RARP frames.
IPv4: The ACE will match all IPv4 frames.
Action: Indicate the forwarding action of the ACE.
Permit: Frames matching the ACE may be forwarded and learned.
Deny: Frames matching the ACE are dropped.
Rate Limiter: Indicate the rate limiter number of the ACE. The allowed range is 1 to 16.
When “Disabled” is displayed, the rate limiter operation is disabled.
Port Copy: Indicate the port copy operation of the ACE. Frames matching the ACE are copied to the port number. The allowed
values are “Disabled” or a specific port number. When “Disabled” is displayed, the port copy operation is disabled.
Mirror:
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is “Disabled.”
Logging:
Indicate the logging operation of the ACE. Possible values are:
Enabled: Frames matching the ACE are stored in the System Log.
Disabled: Frames matching the ACE are not logged.
NOTE: The system log memory size and logging rate is limited.
Shutdown: Indicates the port shutdown operation of the ACE. Possible values are:
Enabled: If a frame matches the ACE, the ingress port will be disabled.
Disabled: Port shutdown is disabled for the ACE.
Counter: The counter indicates the number of times the ACE was hit by a frame.
Modification Buttons:
You can modify each ACE in the table using the following buttons:
“+” button: Inserts a new ACE before the current row.
“e” button: Edits the ACE row.
“up arrow” button: Moves the ACE up the list.
“down arrow” button: Moves the ACE down the list.
“X” button: Deletes the ACE.
“+’ button: The lowest plus sign adds a new entry at the bottom of the ACE listings.