Filter
Top Products
724-746-5500 | blackbox.com
Page 90
LGB5028A User‘s Manual
724-746-5500 | blackbox.com
Chapter 6: Configuration
Upper right icon (Refresh, <<, >> ): Click on the “Refresh” icon to manually refresh the IGMP Group Status; use the “<<” and
“ >>” keys to go to the next/previous page or entry..
6.6.6 IPv6 SSM Information
The section explains how to configure the Entries in the MLDv2 Information Table shown on this page. The MLDv2 Information
Table is sorted first by VLAN ID, then by group, and then by Port No. Different source addresses that belong to the same group
are treated as a single entry.
Each page shows up to 64 entries from the MLDv2 SSM (Source-Specific Multicast) Information table, and the default is 20,
selected through the “entries per page” input field. When first visited, the Web page will show the first 20 entries from the
beginning of the MLDv2 Information Table. The “Start from VLAN” and “Group” input fields allow the user to select the starting
point in the MLDv2 Information Table.
Web Interface
To display the MLDv2 IPv6 SSM Information in the Web interface:
1. Click “Configuration,” “MLD Snooping,” “IPv6 SSM Information.”
2. If you want to auto-refresh the information, click the box next to “Auto-refresh.”
3. Click ”Refresh” to refresh a MLDv2 IPv6 SSM Information entry.
4. Click “<<” and “ >>” to move to the previous or next entry.
Figure 6-38. The MLDv2 Information screen.
Parameter Description
MLDv2 Information Table Columns
VLAN ID: VLAN ID of the group.
Group: Group address of the group displayed.
Port No.: Switch port number.
Mode: Indicates the filtering mode maintained per VLAN ID, port number, or Group Address basis. The mode can be either
“Include” or “Exclude.”
Source Address: Show the IP address of the source. Currently, the system limits the total number of IP source addresses for
filtering to 128.
Type: Indicate the Type. It can be either “Allow” or “Deny.”