Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 47
LGB5028A User‘s Manual
Chapter 6: Configuration
Parameter Description
Port: The logical port for the settings contained in the same row.
Q(n): Qn is the Queue number, QoS queues per port. Q0 is the lowest priority queue.
Rx/Tx: The number of received and transmitted packets per queue.
Auto-refresh: Click on auto-refresh to refresh the queuing counters automatically.
Upper right icon (Refresh, clear): You can click on these buttons to refresh the queuing counters or clear them manually.
6.1.6 SFP Information
The section describes detailed information about the SFP module, including connector type, fiber type, wavelength, band rate,
and vendor OUI.
Web Interface
To display the SFP information in the Web interface: Click “Configuration,” “Port,” then “SFP Information.”
Figure 6-6. SFP Information screen.
Parameter Description
Connector Type: Display the connector type, for instance, UTP, SC, ST, LC, and so on.
Fiber Type: Display the fiber mode, for instance, multimode, single-mode.
Tx Central Wavelength: Display the fiber optical transmitting central wavelength, for instance, 850 nm, 1310 nm, 1550 nm, and
so on.
Baud Rate: Display the maximum baud rate of the fiber module supported, for instance, 10M, 100M, 1G, and so on.
Vendor OUI: Display the manufacturer's OUI code which is assigned by IEEE.
Vendor Name: Display the company name of the module manufacturer.
Vendor PN: Display the module manufacturer’s part number.
Vendor Rev (Revision): Display the module revision.