Filter
Top Products
724-746-5500 | blackbox.com
Page 190
LGB5028A User‘s Manual
724-746-5500 | blackbox.com
Chapter 7: Security
7.5.3 Port Status
The section provides detailed NAS statistics for a specific switch port running EAPOL-based IEEE 802.1X
authentication.
Web Interface
To configure a NAS Port Status Configuration in the Web interface:
1. Specify the Port you want to check.
2. Check the box next to “Auto-refresh.”
Figure 7-13. The NAS Statistics Port 1 screen.
Parameter Description
Port State
Admin State: The port's current administrative state. Refer to NAS Admin State for a description of possible values.
Port State: The current state of the port. Refer to NAS Port State for a description of the individual states.
QoS Class: The QoS class assigned by the RADIUS server. The field is blank if no QoS class is assigned.
Port VLAN ID: The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not overridden by NAS.
If the VLAN ID is assigned by the RADIUS server, “(RADIUS-assigned)” is appended to the VLAN ID.
If the port is moved to the Guest VLAN, “(Guest)” is appended to the VLAN ID.
Port Counters
EAPOL Counters: These supplicant frame counters are available for the following administrative states:
• Force authorized
• Force unauthorized
• Port-based 802.1X
• Single 802.1X
• Multi 802.1X