Filter
Top Products
108
OMNISCANNER
Press to open the TDRL screen to further review and diagnose the
graph.
The Return Loss response from the connector located at 2 m is well within the
S-Bands and performs significantly better than the requirements. The Return Loss
in the cable is the source of the failure even though the cable’s Return Loss
response peaks are less than those of the connection. By knowing that the
connection meets its performance requirement, the cable is easily identified as the
non-compliant component of the link.
The following table summarizes the typical diagnosis process.
Return Loss TDRL exceeds Conclusion
S-Band limits
PASS N/A Return Loss of link is good
FAIL YES Connection fails. Replace or
reterminate. Plug and/or jack can be at
fault.
FAIL NO Cable is not within specifications