Filter
Top Products
21
4. Use the up-arrow or down-arrow key to move to the appropriate character, or
simply press 8 on your keypad repeatedly until the appropriate letter or
number appears in the highlighted field. Press the key to toggle
between uppercase and lowercase letters.
5. Press the right-arrow to close the drop-down list and highlight the next letter
to be edited. Notice that OMNIScanner does not overwrite existing
characters. To delete single characters use the function key. To clear
an entire field use the function key.
6. Press ENTER to accept the field and exit the edit mode.
1.15 Technical Support
If you have technical questions, call Black Box Technical Support at 724-746-5500.
NOTE
Before calling Technical Support, please have your serial number and
the hardware and software version numbers available.
1.16 Product Versions
To display the software version number, the hardware version number, the serial
number, and the factory calibration data for OMNIScanner, press and hold the
Backlight key. The CONTRAST screen will be displayed, which contains
information that you may need to provide when calling Technical Support.
To display software, hardware, and serial number information for
OMNIRemote, connect the units with the supplied test cable and press the
function key.
CHAPTER 1: Introduction