Filter
Top Products
22
OMNISCANNER
Select Remote Info to open the REMOTE INFO screen, which contains the
date the reference was last set, the hardware and software information, the serial
number, the battery indicator, and the factory calibration data.
The serial number can also be found on the back of each unit.
To display information for OMNIFiber, attach the OMNIFiber adapters to
OMNIScanner and OMNIRemote, connect the units with the supplied fiber
launch cable and press the (Setup) function key.
Select Fiber Into to open the Fiber Info screen, which contains the serial
numbers and the date the adapters were last factory calibrated.