Filter
Top Products
135
APPENDIX A: Technical Specifications
A.9 Memory
• Control: Flash Memory allows electronic upgrading of both OMNIScanner and
OMNIRemote programs.
• Test Storage: Up to 1000 complete Autotest results can be stored in permanent
flash memory. They are not subject to loss due to power or battery failures.
A.10 OMNIScanner Autotest Functions
Full suite of tests to determine if cable meets generic cabling or network type
requirements.
• Extended performance range Cabling (CAT 6 and CAT 7)
• TIA: CAT 6 Link, CAT 5E Link, CAT 5E Channel, CAT 5 Link 95 and 67 TSB,
CAT 5 Channel 95 and 67 TSB, CAT 3 Link, CAT 3 Channel, TIA 568A
• ISO/IEC: Class F Link, Class E Link, Class D Link 50173, Class D Channel
50173, Class D 11801-95, Class C Link 50173, Class C Channel 50173,
ISO 11801 Equation
• Vendor: OMNIScanner supports several vendor-specific Autotests
• IEEE: 10 BASE-T, 100 BASE-X, 1000 BASE-T, 16-Mbps Token Ring, 4-Mbps
Token Ring, 1000BASE-SX (50-micron), 1000BASE-SX (65.2-micron),
1000BASE-LX (50-micron), 1000BASE-LX (65.2-micron), 100BASE-F,
10BASE-FL, 10BASE-FB, Token Ring
• ATM: ATM155 Mbps, ATM 51 Mbps, ATM 155, ATM 155 SWL, ATM 622
(62.5 micron)
• FDDI
• Fiber Channel
• AS/NZ: AS/NZ D Link, AS/NZ D Channel, AS/NZ C Link, AS/NZ C Channel
• ANSI: FDDI Orig. 62.5 uM, FDDI Orig 50 uM, FDDI L/C 62.5 uM,
FDDI L/C 50 uM, Fiber Channel 266 62.5 uM, Fiber Channel 266 50 uM