Filter
Top Products
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages
.
Bosch Security Systems, Inc. | 1/07 | 4998122703-01 167
Table 116: Supported Event Codes
Code Meaning Code Meaning
AA Force perimeter delay by user ZZZ. 7B RF receiver tamper restoral by SDI device ZZZ.
A9 Status = perimeter instant. 7A Status fire alarm point ZZZ.
A8 Status = perimeter delayed. 79 Status fire trouble point ZZZ.
A7 Perimeter instant by user ZZZ. 78 RF interference restoral by SDI device ZZZ.
A6 Perimeter delayed by user ZZZ. 77 Status RF trans low battery point ZZZ.
A5 Passcode for user ZZZ deleted. 76 Status RF trans tamper alarm point ZZZ.
A4 Point bus restore. 75 Status RF trans tamper trouble point ZZZ.
A2 Transmitter point ZZZ battery low. 74 Sensor Trouble point ZZZ.
A1 Transmitter point ZZZ battery restore. 73 Sensor Trouble Restoral point ZZZ.
A0 Transmitter point ZZZ tamper restore. 72 Status fire missing point ZZZ.
9F RF receiver trouble by SDI device ZZZ. 71 Status missing alarm point ZZZ.
9A Extra RF point ZZZ. 70 Status missing trouble point ZZZ.
99 RF receiver restore by SDI device ZZZ. 6F Status door forced point ZZZ.
98 RF interference by SDI device ZZZ. 6E Door locked point ZZZ.
95 Transmitter point ZZZ tamper alarm. 6D Missing fire supervision point ZZZ.
94 Transmitter point ZZZ tamper trouble. 6C Missing supervision point ZZZ.
92 Equipment restoral by SDI device ZZZ. 6B Status missing fire supervision point ZZZ.
91 Card assigned by user ZZZ. 6A Status missing supervision point ZZZ.
90 Card deleted by user ZZZ. 69 Status door left open point ZZZ.
8F Door cycled point ZZZ. 68 Failed to execute point ZZZ.
8E Door unlocked point ZZZ. 5F Analog service point ZZZ.
8D Door locked point ZZZ. 5E Analog restoral point ZZZ.
8C No entry point ZZZ. 5D Status analog service point ZZZ.
8B Door left open point ZZZ. 5C Test Failed path ZZZ.
8A Door request point ZZZ. 5B External device ZZZ.
89 Network failure path ZZZ. 5A Custom Function ZZZ Executed.
88 Network restoral path ZZZ. 59 Low Temperature point ZZZ.
87 Network condition path ZZZ. 58 Low Temperature Restoral point ZZZ.
86 Equipment fail by SDI device ZZZ. 56 Unverified Event point ZZZ.
85 Status supervision point ZZZ. 55 Printer Status by SDI device ZZZ.
84 Fire Supervision Restoral point ZZZ. 54 Abort by user ZZZ.
83 Fire supervision point ZZZ. 53 Service Request.
82 Fire Supervision Trouble point ZZZ. 52 Output ZZZ State.
81 Fire Supervision Trouble Restoral point ZZZ. 51 Output ZZZ State Restoral.
7F Status fire supervision point ZZZ. 50 Bypass Restoral point ZZZ.
7E Extra account path ZZZ. 4F Alarm Silenced point ZZZ.
7D Low signal strength path ZZZ. 4E Alarm-Panel Substitution path ZZZ.
7C RF receiver tamper by SDI device ZZZ.