Bosch Appliances TTCAN Network Card User Manual


 
User’s Manual
BOSCH
- 28/77 -
Revision 1.6TTCAN
11.11.02
manual_about.fm
3.4.2 Transmission Request Registers
TxRqst32-1Transmission Request Bits (of all Message Objects)
one
The transmission of this Message Object is requested and is not yet done.
zero
This Message Object is not waiting for transmission.
These registers hold the TxRqst bits of the 32 Message Objects. By reading out the TxRqst
bits, the CPU can check for which Message Object a Transmission Request is pending. The
TxRqst bit of a specific Message Object can be set/reset by the CPU via the IFx Message
Interface Registers or (when not in time triggered mode) by the Message Handler after
reception of a Remote Frame or after a successful transmission.
3.4.3 New Data Registers
NewDat32-1New Data Bits (of all Message Objects)
one
The Message Handler or the CPU has written new data into the data por-
tion of this Message Object.
zero
No new data has been written into the data portion of this Message Object
by the Message Handler since last time this flag was cleared by the CPU.
MsgLstThese registers hold the NewDat bits of the 32 Message Objects. By reading out the
NewDat bits, the CPU can check for which Message Object the data portion was updated.
The NewDat bit of a specific Message Object can be set/reset by the CPU via the IFx
Message Interface Registers or by the Message Handler after reception of a Data Frame or
after a successful transmission.
3.4.4 Interrupt Pending Registers
IntPnd32-1 Interrupt Pending Bits (of all Message Objects)
one
This message object is the source of an interrupt.
zero
This message object is not the source of an interrupt.
These registers hold the IntPnd bits of the 32 Message Objects. By reading out the IntPnd
bits, the CPU can check for which Message Object an interrupt is pending. The IntPnd bit of a
specific Message Object can be set/reset by the CPU via the IFx Message Interface Registers
or by the Message Handler after reception or after a successful transmission of a frame. This
will also affect the value of IntId in the Interrupt Register.
Transmission Request 1 Register
(addresses 0x81 & 0x80)
1514131211109876543210
TxRqst16-9 TxRqst8-1
Transmission Request 2 Register
(addresses 0x83 & 0x82)
TxRqst32-25 TxRqst24-17
rr
New Data 1 Register
(addresses 0x91 & 0x90)
1514131211109876543210
NewDat16-9 NewDat8-1
New Data 2 Register
(addresses 0x93 & 0x92)
NewDat32-25 NewDat24-17
rr
Interrupt Pending 1 Register
(addresses 0xA1 & 0xA0)
1514131211109876543210
IntPnd16-9 IntPnd8-1
Interrupt Pending 2 Register
(addresses 0xA3 & 0xA2)
IntPnd32-25 IntPnd24-17
rr