Filter
Top Products
User’s Manual
BOSCH
- 6/77 -
Revision 1.6TTCAN
11.11.02
manual_about.fm
1. About this Document
1.1 Change Control
1.1.1 Current Status
Revision 1.6
1.1.2 Change History
Issue Date By Change
Draft 0.0 30.06.00 F. Hartwich First Draft
Revision 0.1 12.01.01 F. Hartwich Gap Control
Revision 0.2 21.10.00 F. Hartwich Trigger Memory
Revision 1.0 29.11.00 F. Hartwich Cycle Count, Global Time Mark
Revision 1.1 11.12.00 F. Hartwich TUR Configuration, Enable Local Time
Revision 1.2 13.12.00 F. Hartwich Time Mark Register, TMC
Revision 1.3 17.01.01 F. Hartwich TUR Configuration Registers
Revision 1.4 30.04.01 F. Hartwich Clock Synch., Stop_Watch, External Events
Revision 1.5 12.10.01 F. Hartwich Editorial changes
Revision 1.6 11.11.02 F. Hartwich Watchdog, Gap Control, Global Time Preset
1.2 Conventions
The following conventions are used within this User’s Manual.
Helvetica bold Names of bits and signals
Helvetica italic
States of bits and signals
1.3 Scope
This document describes the TTCAN IP module and its features from the application
programmer’s point of view.
All information necessary to integrate the TTCAN IP module into an user-defined ASIC is
located in the ‘Module Integration Guide’.
1.4 References
This document refers to the following documents.
Ref Author(s) Title
1 FV/SLN1 CAN Specification Revision 2.0
2 K8/EIS1 Module Integration Guide
3 K8/EIS1 VHDL Reference CAN User’s Manual
4 ISO ISO 11898-1 “Controller Area Network (CAN) - Part 1:
Data link layer and physical signalling”
5 ISO ISO 11898-4 “Controller Area Network (CAN) - Part 4:
Time triggered communication”