Brother 9040CN All in One Printer User Manual


 
Scanning
56
2
h The file name is set automatically. However, you can create a name of your choice using the dial pad.
You can only change the first 6 digits of the file name.
Press OK.
Note
Press Clear/Back to delete the letters you entered.
i Press Mono Start or Color Start to start scanning.
Note
Scan type depends on the settings in the Function Menu or the setting set manually on the panel,
Mono Start or Color Start do not change the settings.
CAUTION
LCD shows Scanning while reading the data. DO NOT unplug the power cord or remove the USB flash
memory drive from the machine while it is reading the data. You could lose your data or damage the USB
flash memory drive.
For MFC-9840CDW 2
a Put a USB flash memory drive into your machine.
b Load your document in the ADF or on the scanner glass.
c Press the (Scan) key.
d Press a or b to choose Scan to USB. Press OK.
e Press a or b to choose 2sided (L)edge, 2sided (S)edge or 1sided. Press OK.
f Choose one of the options below.
To change the setting, choose Change Setting. Press OK and go to g.
To start scanning with the settings you set in the Function Menu (Menu, 5, 2), choose Start Scan.
Press OK and go to j.
g Press a or b to choose the quality you want.
Press OK.
h Press a or b to choose the file type you want.
Press OK.
Note
If you choose color in the resolution setting, you cannot choose TIFF.
If you choose monochrome in the resolution setting, you cannot choose JPEG.